You've got your gear.
Now let's get you dialed in.
This page is your starting point for getting the most from your Huntek HaulRig™ Harness System. From setup to safe hauling techniques, we're here to help you use it with confidence, efficiency, and field-ready awareness.
User Guide
Download the full HaulRig User Guide (PDF). [COMING SOON]
⚠️ The HaulRig is designed for outdoor use and field hauling. Please use with caution, especially in rough terrain or during heavy pulls. Huntek assumes no responsibility for injuries or damage resulting from improper use, modification, or failure to follow all safety instructions. Use at your own risk. Even when used as intended, hauling heavy game involves significant physical effort and carries certain risks — always assess your physical condition before use.
⚠️ NOT FOR CLIMBING OR FALL PROTECTION
This is NOT a safety harness. For hauling and gear use only. Misuse may cause serious injury or death.
How-To
Here's a short video explaining how to use your HaulRig Harness System.
Step by Step
1) Install the DualPoint
Every HaulRig™ comes with a DualPoint—no need to buy it separately.
To install, use an 11mm wrench and a 7/16" ratchet (or adjustable pliers).
Tip: You can roll the sled back for storage with the DualPoint left installed.
2) Clip the Lower Harness to the DualPoint
Take the longer, lower part of the HaulRig and clip it to either side of the DualPoint.
3) Position the Upper Harness Over Shoulders
Take the shorter, upper section and place it over your head so it rests comfortably on your shoulders.
Tip: Don't worry about the perfect fit yet—you'll fine-tune the adjustments once everything is connected.
4) Connect the Lower to the Upper Harness
Thread the lower strap through the loops of the upper section and clip them into the opposite anchor or of the DualPoint.
5) Adjust to Fit
Adjust the shoulder height so the lower straps sit at your preferred hip level. Some prefer it higher, others lower—it's all about comfort and efficiency.
⚠️ For optimal weight distribution, we recommend loading the upper harness slightly backward — this helps transfer part of the load onto the shoulders and reduce hip strain. Please refer to the video for a visual representation.
If you have shoulder discomfort or injuries, the upper section can be removed entirely.
Elevate Your Hunt
Soon, we'll be adding in-field insights to help you go beyond the manual. Expect updates on:
- How to adjust for different heights and layering systems
- Maxing out the handles for leverage, power and comfort
- Creative, unorthodox ways to use your HaulRig in the field
- And more!
